Avolié Systems Request early access

Help: Management

Last updated: 12 November 2026

This page explains every setting in Management, step by step. In Comb, the small round question mark in Management brings you straight to the matching part of this page. The texts here are the same as the explanations in the program.

Comb is in development. Management is described as it is built; what you see depends on what your company has booked.

Help: Files · Help: Account and payment · Help: Shift plan

Management at a glance

“Management” is the place where the management of your company sets everything up for all staff. Only the management sees it. It has four tabs.

Management is the one place where a company decides how Comb behaves for everybody. It has four jobs: the look, the rights, the people and a few settings. Because changes apply to all staff at once, it is visible only to the management. Take your time here once, and daily work becomes quiet.

Step by step

  1. Open “Management” in the top menu.
  2. “Appearance”: colours, symbols, pattern and menu position.
  3. “Permissions”: what departments, roles and single people may do in each module.
  4. “Departments & roles”: invite people, add, rename and delete departments and roles and assign people.
  5. “Settings”: switch the small question marks on or off for staff.

Good to know

  • Everything here is for the whole company. Changes apply to every person as soon as you save.
  • Every area has a small question mark. It brings you straight to the matching part of this page.

Departments

A department is where someone works, for example Kitchen or Front desk. Rights can be given to a whole department at once.

A department answers the question “where does a person belong?”. It is the best level to give rights, because most people in a department need the same things. Keep the list short and recognisable, as in your organisation chart. Do not create a department for every project.

Step by step

  1. Open “Management”, then “Departments & roles”.
  2. To add a department, type a name into “New department”, for example Kitchen, and press “Create”.
  3. To rename it, press “Rename”, type the new name and press “Save name”.
  4. To delete it, press “Delete” and confirm.

Good to know

  • When a department is deleted, its people stay without a department. Their rights from role and person stay. The rights of the department are deleted.
  • A person has at most one department.
  • You deleted a department by mistake? Create it again and put the people back. The rights of the old department are gone and must be set again.

Roles

A role is the task of a person, for example Team lead or Trainee. A role can change what the department allows.

A role answers “what does this person do?”. While the department is for the group, the role is for the differences inside it. Typical roles are Lead, Staff, Trainee or Accountant. A role can add to or take away from what the department allows.

Step by step

  1. Open “Management”, then “Departments & roles”.
  2. To add a role, type a name into “New role”, for example Team lead, and press “Create”.
  3. To rename a role, press “Rename”, type the new name and press “Save name”.
  4. To delete a role, press “Delete”. If people are assigned to it, choose the role they are moved to and press “Move and delete”.

Good to know

  • A new role sets nothing at first. Its rights are set under “Permissions”.
  • To delete a role with people you need another role to move them to. Add one first if there is none.
  • The role “Management” always may do everything. It cannot be changed or deleted.

People

Every person has one role and can have one department. Both decide what the person may do.

People are the combination of one department and one role. Changing either changes the person’s rights at once. This is how you handle promotions, changes of department and temporary tasks without touching a single permission.

Step by step

  1. Open “Management”, then “Departments & roles” and scroll to “People”.
  2. Choose the department and the role in the two lists next to the person. The change applies at once.

Good to know

  • New people are invited under “Invite a person” on this tab and get a department and a role there. You can change both here afterwards.
  • The management itself cannot be moved to another role.

Invite a person

Invite a new person to Comb. They get an email with a link, choose a password there and are then in Comb.

An invitation is a personal link by email. The person chooses their own password, so you never know or send one. Role and department are fixed when you invite, which means that a new person starts with exactly the right permissions, not with everything and not with nothing by chance.

Step by step

  1. Open “Management”, then “Departments & roles”.
  2. In “Invite a person”, enter the email address and, if you like, the name.
  3. Choose a department (optional) and a role. If the role does not exist yet, choose “Add a new role …” and type its name.
  4. Click “Send invitation”. The person then appears under “Open invitations” until they have accepted.

Good to know

  • Who may invite: the management and everyone who may manage “People”. Those people find the form on the start page.
  • A new person sees nothing in a module until you allow it under “Permissions”.
  • The link in the email leads to your company’s own Comb address.
  • At most 30 new invitations per day are possible.
  • Inviting is not possible while your licence is not active or all seats are used.
  • “Send invitation” is switched off? Either all seats are used, the licence is not active or you reached 30 invitations today. See “Seats” and “Licence paused”.

Seats

Every account in your company takes one seat, including the management. The number of seats comes from your licence.

A seat is a person who can sign in. The licence says how many seats you have. Everybody counts: the management, staff and invited support contacts. The counter “2 of 5 seats used” shows how much room is left.

Step by step

  1. Open “Management”, then “Departments & roles”.
  2. Above the form you see, for example, “2 of 5 seats used” and how many are left.

Good to know

  • When all seats are used, “Send invitation” is switched off.
  • You free a seat by withdrawing an open invitation or by removing a person.
  • Accounts of invited support contacts take a seat as well.
  • More seats need a larger licence.

Open invitations

People who were invited but have not accepted yet are listed here.

This list shows invitations that nobody has accepted yet. It occupies a seat as long as it is open. A glance at the list tells you who still has to react, so you can remind them in person.

Step by step

  1. Open “Management”, then “Departments & roles”, and scroll to “Open invitations”.
  2. “Send again” sends a fresh email with a new link. The old link stops working.
  3. “Withdraw” cancels the invitation. The link stops working and the person disappears from the list.

Good to know

  • Role and department stay as you chose them.
  • The same invitation can be sent again once per minute.
  • Once the person has accepted, they are no longer listed here. You then find them under “People”.

Remove a person

Remove a person who no longer works with you. Their account is deleted and they can no longer get in.

Removing is final for the account but kind to your data: everything the person created stays. The seat is free again at once. Do this on the person’s last day, so that nobody can sign in with an old password.

Step by step

  1. Open “Management”, then “Departments & roles” and scroll to “People”.
  2. Click “Remove” next to the person and confirm.

Good to know

  • Files the person uploaded stay.
  • The management cannot be removed here, and you cannot remove yourself.
  • Accounts of other administrators and of support contacts are not removed here.
  • The seat becomes free again.

Permissions: who may do what

Here you decide what departments, roles and single people may do in each module. Only modules your company has booked are listed.

Permissions are the heart of the management. The rule is simple: nothing is allowed until you allow it. You pick a module, pick who you are setting up, and choose a level. The short text under every choice says in plain words what it means, so you need no manual. Nothing is saved until you press “Save”.

Step by step

  1. Open “Management”, then “Permissions”.
  2. Choose a module on the left, for example “Files”.
  3. Choose at the top whom you set up: “Department”, “Role” or “Person”, and then the entry.
  4. Set the permissions. Under every choice a short text explains what it means.
  5. Press “Save”. “Discard” throws your changes away.

Good to know

  • Until you save, the bar at the top shows “Not saved”. If you switch module or entry with unsaved changes, Comb asks first.
  • A person with no permission in a module does not see the module at all. It is not shown in the menu.
  • Further modules appear here automatically as soon as your company books them.
  • Somebody does not see a module? Check the three levels for this person: person, role, department. Without any setting the module stays hidden.

Whom do you set up?

You can set rights for a whole department, for a role or for one single person. Use the department for what everyone there needs, the role for differences by task, and the person only for exceptions.

Choose the level by how many people the rule is meant for. Department for “everyone in the kitchen”, role for “every lead, wherever they work”, person for “only Anna, because she builds the new price list”. The fewer exceptions on person level, the easier you can explain the system to others.

Step by step

  1. Open “Permissions” and choose a module.
  2. Press “Department”, “Role” or “Person”.
  3. Choose the entry. For persons you choose from a list.

Good to know

  • The management cannot be set up. It may always do everything.

How the levels work together

Person comes before role, role comes before department. “Neutral” means: nothing is set here, the next level applies. If nothing is set anywhere, it is not allowed. In folders, for each right the nearest folder above that sets it counts first.

When several levels say something different, the most personal wins: person before role before department. “Neutral” means “I do not decide here”. That is what makes the system calm: you only set what is special, and the rest follows from above. If nobody decides anywhere, the answer is no.

Step by step

  1. Example: the department Kitchen may upload. The role Trainee says No to uploading. A trainee in the kitchen may not upload, because the role comes before the department.
  2. If you set Yes for uploading for one single trainee, she may upload, because the person comes before the role.

Example

Department Service: “Yes” for sharing. Role Trainee: “No” for sharing. Person Emma (a trainee): “Neutral”. Result: Emma may not share, because the role beats the department. If you set “Yes” on Emma as a person, she may, because the person beats the role.

Basic permission in Files

The basic permission is what the chosen department, role or person may do in Files in general. It applies to every folder that has no setting of its own.

The basic permission is the default for everything you have not set separately. This makes it the fastest lever: one setting per department covers the whole module. Special cases are added afterwards per folder.

Step by step

  1. Open “Permissions” and choose the module “Files” and whom you set up.
  2. Under “Basic permission in Files” choose a level. The levels are explained below.
  3. Press “Save”.

Good to know

  • Most companies set only the basic permission for departments and add a setting per folder only where something differs.

Folders

Under the basic permission every folder is listed. For each folder you can set what applies here. Without a setting of its own, what is set for the folder above applies. In the program the text under a level begins with “The department”, “The role” or “The person”, depending on your choice.

Folders inherit: what you set on a folder applies to everything below it, until a subfolder says something else. That allows a clean structure such as “Personnel: nobody except the management” with one setting at the top. Highlighted folders in the list are those with their own setting.

Step by step

  1. Open “Permissions”, choose “Files” and whom you set up.
  2. Find the folder in the list. Subfolders are indented.
  3. Choose a level in the field next to the folder. The text below it explains the level.
  4. For “Choose yourself …” the board opens, see “Set rights one by one”.
  5. Press “Save”.

Neutral

The department, role or person sets nothing here. What is set elsewhere applies: for folders the folder above, then the next level (person before role before department), at the end the basic permission of the module.

No access

Does not see this folder or anything in it. It appears neither in the list nor in search, and links to it show nothing. This also applies to all subfolders unless they are set otherwise.

View only

May open the folder, view files and download them. May not add, change or delete anything.

Work with

Like “View only”. In addition may upload files, add new versions, rename and move files and folders, and set tags. May not delete.

Work with and delete

Like “Work with”. In addition may delete files and folders. Deleted items stay in the trash for 30 days and can be restored.

Everything (including sharing)

Full control of the folder: everything above. In addition may share files with a link and delete comments of others.

Choose yourself …

You set every right one by one, see the board below.

Good to know

  • Folders with a setting of their own are highlighted. “Neutral” removes the setting of a folder.
  • Folders themselves have no permissions button. All permissions are set here in Management.

Set rights one by one

With “Choose yourself …” a board opens. It lists every right once. Each right has a slider with three positions: No, Neutral, Yes.

The board is for the rare cases where the ready-made levels do not fit. Every right is listed once and has three positions: No, Neutral, Yes. Use it sparingly, because standard levels are easier to understand for everybody who comes after you.

Step by step

  1. Choose “Choose yourself …” in the list of a folder or of the basic permission.
  2. Press ✗ for No, / for Neutral or ✓ for Yes next to each right.
  3. Press “Save”.

Good to know

  • No: may not.
  • Neutral: the next level applies, for example the department.
  • Yes: may.
  • Anyone who may do something other than view may also view. With “Manage” all rights are Yes. With “View: No” all rights are No.

Permissions in other modules

Every other module has one setting per department, role and person. It applies in the whole module. The levels and the board work like in Files.

Other modules have one level per department, role and person, applying to the whole module. The levels work the same way as in Files, so you only learn the idea once. For finer control, such as in the shift plan, there is an extra board (see “Shift plan: detailed rights”).

Step by step

  1. Open “Permissions” and choose the module on the left and whom you set up at the top.
  2. Choose a level under “Basic permission in this module”. The text below explains it.
  3. Press “Save”.

Good to know

  • No access: the module is not visible. It does not appear in the menu.
  • View only: may only view entries.
  • Work with: like “View only”. In addition may add, change and move, but not delete.
  • Work with and delete: like “Work with”. In addition may delete.
  • Everything: full control in the module, including settings.

Shift plan: detailed rights

The shift plan holds sensitive things: who works when, who is sick, what people earn. That is why its rights can be set action by action. Below the basic level you see a board with eight rights. Each right is enforced by the server, so a person without it cannot use it, not even by tricks.

Step by step

  1. Open “Management”, then “Permissions”, and choose the module “Shift plan”.
  2. Choose whom you set up: department, role or person.
  3. Set the basic level first. Whoever may manage the module may do everything, department leads plan their own department.
  4. Under “Roster: detailed rights” choose No, Neutral or Yes for each of the eight rights. Neutral lets the base level decide.
  5. Press “Save”. Open shift plans of the people concerned adjust themselves within a short time.

Good to know

  • The eight rights are: plan and change shifts; publish and withdraw weeks; approve vacation and swaps; see wishes of the team; correct stamps; hours accounts and month closing; see hourly wages and personnel costs; change roster settings.
  • Person beats role, role beats department, as everywhere. The owner of the company may always do everything.
  • By default, department leads may plan, publish, approve, see wishes and correct stamps in their own department. An explicit “No” takes this away.
  • Wages and settings are not given to leads by default. Give them explicitly if you want.
  • A lead cannot plan, although they are lead? Check whether an explicit “No” stands on the person, role or department for “Plan and change shifts”. An explicit No beats the lead default.

Example

Tom leads the kitchen and should plan, but must not see wages. You leave the standard for “Plan”, set “See hourly wages” to No for the person Tom, and save. While Tom has the shift plan open, the cost display disappears within a minute, and he sees the note that his rights were changed.

Help marks (“?”)

Many functions have a small question mark next to them. It leads to a step-by-step explanation. Here you switch it on or off for your staff.

The small question marks are your built-in training. They save you explaining things again and again. If your staff are well trained, or if you prefer a quiet screen, switch them off. You, as management, still see them, because you are the one who gets asked.

Step by step

  1. Open “Management”, then “Settings”.
  2. Tick or untick “Show help marks to staff”. The change is saved at once.

Good to know

  • As management you always see the marks.
  • When the marks are switched off, the hint about the question mark in the empty Files window is not shown either.
  • The change applies the next time Files is opened.

Introduction for the management

When the management opens Comb for the first time, a short guided introduction in five steps appears. It sets up departments and roles, invites the first people and explains rights.

The introduction is a guided tour for the person who sets Comb up. It does the same things as the Management tabs, only one after another and with explanations. You can leave at any time, nothing is final and your progress is saved.

Step by step

  1. Follow the steps with “Next” and “Back”.
  2. “Continue later” closes it and brings it back at the next sign-in. “Skip the introduction” ends it for good.
  3. To see it again, open “Management”, then “Settings”, and click “Start the introduction again”.

Good to know

  • Only the management sees the introduction.
  • Nothing in it is final. Everything can be changed later in Management.
  • Your progress is saved, also if you close the window.

Introduction: Departments and roles

Step 2 creates your first departments and roles.

Here you build the skeleton of your company in two minutes. The suggestions are only examples, tap what fits and ignore the rest. You can rename or delete everything later.

Step by step

  1. Tap a suggestion to add it, or type a name and click “Add department” or “Add role”.
  2. Add at least one role. You need it to invite people.

Good to know

  • A department is where someone works, a role is the task.
  • A name has 1 to 40 characters and cannot be used twice.

Introduction: Invite your team

Step 3 invites the first people. It works exactly like “Invite a person”.

This step is the same as “Invite a person”. The advantage is that you do it while the structure is fresh in your mind. Skip it if you want to set up the rights first.

Step by step

  1. Enter the email address, choose department and role and click “Send invitation”.
  2. Repeat this for each person, or click “Next”.

Good to know

  • You can skip this step and invite people later in Management.

Introduction: Modules and rights

Step 4 shows which modules your company has booked and reminds you of the most important rule.

Here you see once what you have booked and the most important rule of the whole system: new people see nothing until you allow it. That is protection, not an obstacle. It means you decide what each person sees, and not the other way round.

Step by step

  1. Read which modules are booked.
  2. Click “Set rights now” to finish the introduction and go straight to Management, or click “Next” to see the summary first.

Good to know

  • New people see nothing in a module until you allow it.
  • Rights are set separately for each department, role or person under “Permissions”.

Introduction: Done

The last step lists what you have set up.

The summary shows what you have done, so you can check it once. If something is missing, go back one step, or fix it later in Management. Nothing needs to be perfect on the first day.

Step by step

  1. Click “Go to the start page”. The introduction is then finished.

Good to know

  • You can start it again under “Management”, then “Settings”.

Appearance

Here you decide how Comb looks for everyone in your company. The page has five areas: colour, symbols, pattern, module bar, and corners and spacing. Each area has its own question mark and its own part of this page.

The appearance is how your company feels in Comb. A calm, recognisable look helps people to feel at home, and a colour that matches your logo makes Comb look like your own tool. All changes are previewed live. You can try as much as you like, since nothing counts for others until you press “Save”.

Step by step

  1. Open “Management”, then “Appearance”.
  2. Work through the areas from top to bottom. They are explained one by one below.
  3. You see the change at once in the whole window. It applies to everyone only after you press “Save”. “Discard” returns to the saved look.
  4. “Reset to standard” returns everything to the standard look.

Good to know

  • Some choices belong to the Design package. They are only available if your company has booked it. Without it you see a note with a link to the shop.

Colour

The main colour for buttons, highlights and symbols.

The main colour appears on buttons, highlights and symbols. Choose a tone that contrasts well with white and with dark: Comb corrects tones that are too light or too dark, so that text stays readable. The ready colours are carefully tested, the own colour is for brand identity.

Step by step

  1. Open “Management”, then “Appearance”.
  2. In the area “Colour” choose one of the ready colours, for example Honey, Ocean or Forest.
  3. With the Design package you can also set an own colour. Press “Own colour” and choose any tone.
  4. “Standard” next to the own colour removes it again.
  5. You see the change at once in the whole window. It applies to everyone only after you press “Save”. “Discard” returns to the saved look.

Good to know

  • Tones that are too light or too dark are adjusted slightly so that everything stays readable.

Symbols

Shape and colour of the symbols, for example for files and folders.

Symbols are the small pictures for files, folders and roles. The shape (hexagon, round, rounded, diamond) sets the character: round is friendly, diamond is modern. Without the Design package, the symbols are coloured by file type, which already helps to recognise PDFs, pictures or tables.

Step by step

  1. Open “Management”, then “Appearance”.
  2. In the area “Symbols” choose a shape: hexagon, round, rounded or diamond.
  3. With the Design package you can set one colour for all symbols. Without it the symbols are coloured by file type.
  4. Below, a sample file, a role and a button show how it will look.
  5. You see the change at once in the whole window. It applies to everyone only after you press “Save”. “Discard” returns to the saved look.

Pattern

A subtle pattern in the background.

The pattern is a whisper in the background. A low strength gives depth without distracting, a high strength gives a clear look. If you work with many people on small screens, a calm background without pattern is often the best.

Step by step

  1. Open “Management”, then “Appearance”.
  2. In the area “Pattern” choose none, honeycombs, dots, lines or grid.
  3. As soon as a pattern is chosen, you can set how strong it is and which colour it has.
  4. You see the change at once in the whole window. It applies to everyone only after you press “Save”. “Discard” returns to the saved look.

Good to know

  • With “None” the background stays plain and the settings for strength and colour disappear.

Module bar

Where the bar with Start, Files and all further modules sits.

The module bar is the main navigation. On wide screens the left side leaves the most room for content; at the top it is closest to what people know from websites; at the bottom it is the thumb zone on phones. Choose according to how most of your people work.

Step by step

  1. Open “Management”, then “Appearance”.
  2. In the area “Module bar” choose the position: top, left, right or bottom. A small preview shows each position.
  3. You see the change at once in the whole window. It applies to everyone only after you press “Save”. “Discard” returns to the saved look.

Good to know

  • The position applies to everyone in your company. Staff only see the modules they are allowed to use.

Corners and spacing

How round the corners are and how much air there is between elements.

Corners and spacing change the feeling more than you would think. Angular corners and tight spacing look businesslike and show more per screen. Round corners and airy spacing look friendly and are easier to hit with a finger.

Step by step

  1. Open “Management”, then “Appearance”.
  2. In the area “Layout” choose the corners: angular, soft or round.
  3. Choose the spacing: airy or compact. Compact shows more on one screen.
  4. You see the change at once in the whole window. It applies to everyone only after you press “Save”. “Discard” returns to the saved look.

Questions that are not answered here?

Write to info@avolie.net and we will add the answer to this page.

Help: Files · Help: Management · Help: Account and payment · Help: Shift plan