Avolié Systems Request early access

Help: Shift plan

Last updated: 12 November 2026

This page explains every part of the shift plan, step by step. In Comb, the small round question mark next to a function brings you straight to the matching part of this page. The texts here are the same as the explanations in the program.

Comb is in development. The shift plan is described as it is built; what you see depends on what your company has booked and on your role.

Help: Files · Help: Management · Help: Account and payment

Shift plan at a glance

The shift plan shows who works when. It has the tabs Shifts, Time clock, Wishes, Absences, Swaps, Hours and Settings (the bar on the left). Which tabs and buttons you see depends on your role.

Think of the shift plan as the single sheet of paper that used to hang in the staff room, but alive: everybody sees the same truth, changes show up at once, and nobody has to phone around to ask who works on Saturday. The tabs on the left follow the life of a shift: you plan it (Shifts), people say what they would like (Wishes), they stamp in and out (Time clock), they report absences (Absences), they swap (Swaps), and at the end of the month the hours are counted (Hours).

Your rights are fine-grained. Besides the basic permission for the module, the management can allow single actions to a department, a role or one person: plan, publish, approve, see wishes, correct stamps, see hours accounts, see wages and change settings. Buttons you may not use are simply not shown. If your rights change while you are working, Comb notices within a short time, reloads the view and tells you.

Step by step

  1. Open “Shift plan” in the module bar.
  2. In “Shifts” you see the week. Use the arrows or the small calendar on the left to change the week, or “Today” to come back.
  3. Press “My shifts” to see only your own shifts.

Good to know

  • The management plans every department and closes months. It needs the permission “Manage” for the module Shift plan.
  • A department lead plans only their own department and approves vacation and swaps there.
  • Everyone else sees the published plan of their own department and their own requests.
  • The module Shift plan only appears if your company has it switched on and you have at least the permission “View”.
  • You do not see the shift plan at all? Then either your company has not switched the module on or you have no permission yet. Ask the person who manages your Comb.

Enter a shift

Planners enter shifts directly in the week view. Each day has a field per shift type with a plus.

A shift is always one person, one day, one shift type. The shift type (for example Early or Late) brings the times and the break with it, so you rarely type times by hand. You can still change the times for a single shift, for example if someone starts an hour later this once. The shift keeps its own times, even if you edit the shift type later.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Click the plus in the field of the day and the shift type. A window opens.
  3. Choose the person. Persons with a wish or an absence that day are marked.
  4. Choose a shift type. The times of the type are filled in. You can change the times and the break for this one shift.
  5. Add a note if you like and press “Save”.
  6. To clear a day, click the shift card and press “Remove”.

Good to know

  • A person has at most one entry per day. “Off” is a shift type that counts no hours.
  • If a shift ends after midnight, it counts for the day it starts.
  • After saving, Comb tells you if a rule is broken. The shift is still saved, so you decide.
  • Public holidays are marked in red in the column header. Sundays too.
  • Months that are closed cannot be changed any more.
  • The plus is missing? Then the week is in a closed month, you are in the staff view, or you are not allowed to plan. Press “Editor view” at the top right, or ask the management for the right “Plan and change shifts”.

Publish a week

Until you publish a week, it is a draft that only planners see. Publishing makes it visible to the staff of that department.

Publishing is the moment your plan becomes real for the team. Before that, you can try things, move people around and change your mind without anybody being confused. The status bar of every area tells you where you are: draft or published. Planning and publishing are two separate rights, so a lead can prepare the plan and the management gives the final go.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Go to the week you want. Every area you may plan has a dark bar with its status.
  3. Press “Publish”. The status changes to “Published”.
  4. To change a published week more freely, press “Withdraw”. Staff then see nothing for that week until you publish again.
  5. To save work, press “Copy last week” in an empty week. All shifts of the previous week are copied for that department.

Good to know

  • Copying never overwrites a day that already has an entry, and it skips days with approved vacation or sick leave.
  • Changes after publishing are visible to staff at once. Withdraw the week first if you want to work on it in peace.
  • People without a department are shown under “No department” and are planned by the management.
  • The button “Publish” is grey or missing? You may plan, but not publish. The management can give you the right “Publish and withdraw weeks”.

Minimum staffing

Minimum staffing tells the plan how many people you need at least for a day and a shift type. Comb then shows you, row by row, where the plan is complete and where it is not, before you publish.

Step by step

  1. Open “Shift plan” and go to the week of the department you plan.
  2. Press “Staffing” in the bar of the area. A table opens with one row per shift type and one column per day.
  3. Enter the number of people you need at least, for example 2 for the early shift on Saturday. Empty or 0 means no requirement.
  4. Press “Save”. Below the plan, the row “Staffing” now shows each day in green (enough) or red (too few), and a list names the gaps.

Good to know

  • The requirement is the same every week until you change it. It is set per department.
  • Only shifts of people who really work are counted. Absences and “Off” do not fill a gap.
  • You need the right “Plan and change shifts” or the right to change settings.
  • The row “Staffing” is not shown? Then no minimum is set for this department yet, or you are in the staff view.

Example

The café needs 2 people for the lunch shift Monday to Friday and 3 on Saturday. You enter 2, 2, 2, 2, 2, 3. When you plan the week, Saturday shows “Lunch 2 of 3” in red. You assign one more person and the field turns green. Before publishing, the list says: “All minimum staffing is met.”

Templates (weekly patterns)

A template is a saved week. If your weeks repeat, for example “normal week” and “high season”, you build the pattern once and place it on any later week with one click. It is more flexible than “Copy last week”, because you can keep several patterns side by side.

Step by step

  1. Plan one week the way you want the pattern to look.
  2. Press “Templates” in the bar of the area.
  3. Type a name, for example “Normal week”, and press “Save this week as a template”.
  4. Later, go to an empty week, open “Templates” and press “Apply to this week” next to the template. Confirm.
  5. Comb tells you how many shifts were taken over and how many were skipped.

Good to know

  • Existing shifts stay. Applying a template only fills what is empty.
  • Days with approved absences and closed months are skipped.
  • Templates belong to one department. To remove one, press “Delete” next to it.

Warnings while planning

Comb checks every shift you save against your rules and tells you if something does not fit.

Warnings are advice, not a lock. Comb does the maths you would otherwise do in your head: is there enough rest between yesterday’s late shift and today’s early shift, is the day too long, does the person have a vacation on that day? You see the warning right after saving, and you decide whether to keep the shift.

Step by step

  1. Save a shift as usual.
  2. If a warning appears, read it. It names the problem, for example “Rest only 7.5 hours (minimum 11)”.
  3. Change the shift if needed. If it is deliberate, you can leave it.

Good to know

  • Checked are the rest time between two shifts, the maximum working time per day and absences.
  • The limits are set in “Settings” under “Rules and holidays”.
  • Comb helps you plan, but it does not replace your own check of the legal rules.

Example

Ben closes on Monday until 23:00 and you put him on early shift at 06:00 on Tuesday. Comb answers: “Rest only 7 hours (minimum 11)”. You move Ben to the late shift on Tuesday and give the early shift to Lea. The warning is gone.

Editor view and staff view

If you plan shifts, you can switch between two views. The staff view shows exactly what your employees see.

When you plan, you see more than your team: drafts, buttons, warnings and costs. The staff view hides all of this and shows exactly what an employee sees. It is the quickest way to check whether your plan is understandable before you publish it.

Step by step

  1. Open “Shift plan” in the module bar.
  2. At the top right of the shift plan, press “Staff view”.
  3. You now see only published weeks of your own department. Nothing can be edited.
  4. To plan again, press “Editor view”.

Good to know

  • The switch only appears if you may plan. Everyone else always sees the staff view.
  • Your choice is remembered in this browser.
  • The switch changes only what you see. Your permissions stay the same.

Your rights and live updates

What you may do in the shift plan is decided by the management, down to single actions: plan, publish, approve, see wishes, correct stamps, see hours accounts, see wages and change settings. Comb checks these rights on the server, not only on your screen, so a hidden button is really not usable.

Step by step

  1. Nothing to do, this happens by itself while the shift plan is open.
  2. If the management changes your rights, Comb notices after a short time.
  3. The view reloads and a short note says “Your roster rights were changed.” New buttons appear, others disappear.

Good to know

  • A dialog you have just opened is not thrown away when nothing relevant changed for you.
  • The management sets these rights under “Management”, “Permissions”, module “Shift plan” (see Help: Management).

Wishes for times

Everyone can say which shifts they would like to work and when they would like to be off. Planners see these wishes while planning.

Wishes are the polite way to tell planners what suits you. A green field says “I would like to work then”, a red field says “I would prefer to be off”. They are not promises, but a planner who sees them will usually try to respect them. Wishes work best when they come in before the plan is made, ideally a week or two ahead.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Open the tab “Wishes”. Use the arrows to choose the week.
  3. Click a field: once for “Wish to work” (green), twice for “Wish to be off” (red), three times to clear it.
  4. Click a day or a shift type in the header to set a whole column or row at once.
  5. Use “Copy week” to take your wishes over to the next week.

Good to know

  • You can leave a note for the whole week or for one day under “Notes”.
  • Past days cannot be changed any more.
  • A wish is no promise. Planners decide, and in the plan they see a heart or a cross with a number on each field.

Vacation and sick leave

Staff request vacation or report sick themselves. Vacation only counts after approval, a sick report counts at once.

Vacation needs an approval, a sick report does not. That is the whole difference. Behind the screen the absence is a bar over several days that appears in the plan, in the hours account and in the checks while planning. Each kind of absence has a setting “Counts as working time”. That decides whether the hours of the day are credited to the person. Vacation and sick leave normally count, a school day or a day off in lieu may be different in your company.

When a planner enters an absence for someone, Comb asks once whether it should count as working time. You can answer differently for each entry, the default comes from the settings.

Step by step

  1. Open “Shift plan”, then the tab “Absences”.
  2. Press “New absence request”. Choose the type, the first and the last day and, if you like, a note.
  3. Press “Request”. Vacation shows “Waiting for approval”.
  4. Planners click the bar of the request in the chart and press “Approve” or “Reject”.

Good to know

  • Planners can also enter vacation or sick leave for a person. It is approved at once. Choose the person in the field “For person”.
  • If shifts are already planned in the approved period, Comb tells you how many. Change them in the plan.
  • Approved days are shown in the plan and credited in the hours account with the daily value of the person.
  • Public holidays and days outside the working days of the person are not counted.
  • You can delete your own request as long as it is waiting. Planners can delete any entry of their people.
  • “Counts as working time” does the wrong thing for a kind of absence? Change the default under “Settings”, “Absence types”. Entries already made keep their value.

Example

Sophie wants to take 10 to 14 March off. She opens “Absences”, presses “New absence request”, chooses “Vacation”, enters both dates and sends. Her lead Tom sees the bar in the chart, clicks “Approve”, and Sophie gets a message. Comb tells Tom that two shifts were already planned in that period. He changes them in the plan.

Absence types and “counts as working time”

Not every absence is the same. A sick day normally counts as paid working time, a day at vocational school too, an unpaid day off does not. You decide this once per kind of absence, and you can still decide differently for a single entry.

Step by step

  1. Open “Shift plan”, then “Settings” (only with the right to change settings).
  2. Find the box “Absence types”. Vacation, sick leave and the others are listed with a tick “Counts as working time”.
  3. Tick or untick and press “Save” in that line.
  4. To add your own kind, such as “Business trip” or “Vocational school”, write the name into the last line, decide on the tick and press “New type”.
  5. When a planner enters an absence for a person, Comb asks: “Should this absence count as working time?” Answer for this entry.

Good to know

  • The built-in kinds (vacation, sick leave) cannot be renamed or deleted, but you can change the tick.
  • A kind that is still used by absences cannot be deleted (“Still in use”).
  • Counting as working time means the day is credited with the daily value of the person in the hours account.

Example

Emil is a trainee. Every Thursday he goes to vocational school. The management created the kind “Vocational school” with the tick on. When Tom enters it for Emil, he is asked about working time and agrees. In the hours account Emil gets 8 hours per school day, so he has no minus hours.

Swap and hand over shifts

On the swap board you offer your shift to colleagues of your department or swap it for one of theirs. The lead approves every swap.

A swap needs three people: the one who gives a shift away, the one who takes it, and the lead who approves. The board makes the steps visible so that nobody has to remember who promised what in the corridor. Only after the approval do the shifts really change owners. Until then, both stay as planned.

Step by step

  1. Open “Shift plan”, then the tab “Swaps”.
  2. Under “Offer your shift” choose the shift and, if you like, one colleague. Press “Offer”.
  3. A colleague presses “Take over”, or “Swap for …” and chooses one of their own shifts.
  4. The entry now says “Waiting for management”. The lead presses “Approve” or “Reject”.
  5. After approval the shifts belong to the new people.

Good to know

  • Only shifts that have not started yet can be offered.
  • Comb refuses a swap that breaks the rest time or falls on a day of absence.
  • You can withdraw your offer at any time before approval. If a colleague accepted and withdraws, the offer stays open.
  • Colleagues of other departments do not see your offers.
  • Comb refuses a swap? Usually the rest time would be broken or the other person is absent that day. The message names the reason. Choose another colleague or another shift.

Hours account

The hours account compares the target hours of a month with the hours worked and shows the balance, which is carried over to the next month.

The hours account is a running balance. Every month starts with a target (what the person should work), subtracts what was really worked, vacation and sick days, and carries the difference forward. A plus means hours owed to the person, a minus means hours still to be worked. The values “Night”, “Sunday” and “Holiday” are only a breakdown for your payroll, they do not change the balance.

Step by step

  1. Open “Shift plan”, then the tab “Hours”.
  2. Use the arrows to choose the month.
  3. Under “My hours account” you see target, worked, vacation, sick, balance, carried over and the end balance.
  4. “Night”, “Sunday” and “Holiday” show how many of the worked hours fell into these times.

Good to know

  • Target = hours per week × days of the month ÷ 7. The hours per week are set per person in “Settings”.
  • Worked hours are the shift times minus the break.
  • The night time is set in “Settings”. Shifts across midnight are split correctly. A break reduces the premium hours in proportion.
  • Comb only shows the hours of these times. The percentage of a premium belongs in your payroll.
  • The target looks wrong? Check “Hours per week” and “Working days” of the person under “Settings”, area “Staff”. Without an entry Comb uses 40 hours on 5 days.

Example

Kim has 40 hours per week on 5 days. In a month with 31 days the target is 40 × 31 ÷ 7 = about 177 hours. She worked 170 hours and had one vacation day worth 8 hours: 170 + 8 = 178 hours. The balance is +1 hour, which is carried into the next month.

Month report and closing

Planners see the report of the month for all their people. The management closes the month, which locks it and passes the balances on.

Closing a month is the line under the sum. Once closed, the numbers cannot move any more, which is exactly what payroll and auditors want. That is why you should work in a fixed order: check open requests, check the report, close the month, send the report, mark it as sent. If you ever have to reopen a month, you give a reason, and Comb records it.

Step by step

  1. Open “Shift plan”, then “Hours” and choose the month.
  2. Under “Month report” check the table. A note tells you if requests are still open.
  3. Press “As CSV” for a file you can open in Excel, or “As PDF” and save the print view as PDF.
  4. The management presses “Close month” and confirms. After sending the report to payroll, press “Mark as sent”.

Good to know

  • A closed month cannot be changed: no shifts, vacation, swaps or publishing in it. The figures are frozen.
  • Months must be closed in order. The end balance moves to the next month as “Carried over”.
  • A closed month can only be reopened by the management, with a reason, and only if the next month is still open. The reason is recorded.
  • A department lead sees the report only for their own department and cannot close the month.
  • “Close month” does not work? Earlier months must be closed first, and you need the right “Hours accounts and month closing”.

Shift types

Shift types are the building blocks of the plan. Every company defines its own, with name, short code, times, break and colour.

Shift types are the vocabulary of your plan. A good set is small and clear: two or three working types and one “Off”. The colour matters more than you think, because people read a plan by colour first and by text second. The short code appears in narrow places like the month view.

Step by step

  1. Open “Shift plan”, then “Settings” (only for the management).
  2. Under “Shift types” change a type and press “Save”, or fill in “New shift type” at the bottom.
  3. Enter name, short code (1 to 4 characters), start, end, break and colour.
  4. Untick “Counts as work time” for types like “Off”.

Good to know

  • New companies start with Early, Late and Off. You can change or delete them.
  • A type that is used in the plan cannot be deleted. Change it instead.
  • Changing a type does not change shifts already planned. Those keep their times.
  • Names must be different within a company.

Example

A restaurant creates three types: “Lunch” (L, 10:00–16:00, 30 min break, orange), “Dinner” (D, 16:00–23:00, 30 min break, blue) and “Off” (–, no hours, grey, “Counts as work time” unticked). Now every week can be built from these three blocks.

Rules and holidays

Here you set the state for the public holidays, the night time and the limits Comb checks while you plan.

These are the limits that Comb uses for its warnings. They are your company’s house rules on top of the law, so set them first and then plan. The state decides which public holidays are marked and counted. The night window is the time for which your payroll may pay a premium.

Step by step

  1. Open “Shift plan”, then “Settings”, area “Rules and holidays”.
  2. Choose the state. Its public holidays are marked in the plan and counted as holiday hours.
  3. Set when the night starts and ends. The default is 23:00 to 06:00.
  4. Set the minimum rest between two shifts (default 11 hours) and the maximum per day (default 10 hours). Press “Save”.

Good to know

  • The holidays are calculated from the state, including the ones that move with Easter.
  • Local holidays of single towns are not included.
  • Changes apply to new checks and to the hours of months that are still open.
  • A local holiday of your town is missing? Local holidays are not included. Enter a day off for the day, or plan around it.

Target hours per person

For every person you set the hours per week and the working days per week. They decide the target of the hours account and the value of a vacation or sick day.

The target hours of a person are the basis of the whole hours account. Part-timers, trainees and mini-jobbers should be set once, correctly, because every month is calculated from these values. A vacation day is worth exactly one working day of the person, not a fixed eight hours.

Step by step

  1. Open “Shift plan”, then “Settings”, area “Staff”.
  2. Enter hours per week and working days for the person.
  3. Press “Save” in that line.

Good to know

  • Without an entry, 40 hours on 5 days apply.
  • A vacation day is worth hours per week ÷ working days, for example 8 hours for 40 hours on 5 days.
  • Closed months keep the values they were closed with.

Example

Eva works 20 hours a week on 4 days. A vacation day is worth 20 ÷ 4 = 5 hours. If she takes three days off, 15 hours are credited. A full-timer with 40 hours on 5 days gets 8 hours per day.

Department leads

A department lead plans their department, approves vacation and swaps there and sees the department’s hours.

A lead is the first point of contact for a department. They plan it, approve what their people request and see its hours. Because leads work close to the team, this saves the management from approving everything. The extra rights of the “Management” board can narrow or widen what leads may do.

Step by step

  1. Open “Shift plan”, then “Settings”, area “Department leads”.
  2. Find the department and choose a person under “Add lead …”.
  3. To remove a lead, press the small cross next to the name.

Good to know

  • A department can have several leads, and a person can lead several departments.
  • A lead who is not in the department still plans it. Leads need at least the permission “View” for the module.
  • A lead cannot approve their own vacation. The management does that.
  • Leads cannot change shift types, rules or target hours and cannot close months.

Click a shift: details and swap

Every shift card in the plan can be clicked. The window shows who works when, and the history of the shift.

The window of a shift is the place where everything about one shift comes together: who, when, which colleagues, which note, which history. For employees it is also the quickest way to offer a shift for swapping, because the button sits right where you look at the shift.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Click a shift card in the week. A window opens with the person, area, day, shift type, times, break and note.
  3. Under “Who else works” you see the colleagues of the same area on that day.
  4. If the shift is yours and still ahead, press “Swap shift”. Choose a colleague or “All colleagues in the area”, add a note and press “Offer”.
  5. The offer now appears in the tab “Swaps”. Planners approve it there as usual.

Good to know

  • Planners see a button “Edit” in the same window.
  • You see the history of a shift only if you plan it or if it is your own.

Move and copy shifts by dragging

Planners can move a shift to another day or shift type by dragging its card.

Dragging is the fastest way to rearrange a week. Take a card, drop it on another field, and it is moved, with all rule checks running as usual. Hold Alt or Ctrl to leave a copy behind, which is ideal for repeating a shift on several days.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Press and hold a shift card and drag it to another field of the plan.
  3. Release the mouse button. The shift is moved and the rules are checked as usual.
  4. To copy instead of move, hold the Alt key or the Ctrl key while you release.

Good to know

  • A shift can only be moved within the same area, and not onto a day on which the person already has a shift.
  • Closed months and the staff view cannot be changed. On a phone or tablet, use the plus fields and the window “Edit” instead.
  • Nothing happens when you drag? The target field already has a shift of that person, belongs to another area, or the month is closed. On touch screens dragging is not available, use the plus and “Edit”.

Open shifts

An open shift is a shift without a person. Staff of the area can apply, and the planner picks someone.

An open shift is a job without a name on it yet. Instead of calling people one by one, you offer the slot to the whole area and let interested people raise their hand. You still decide who gets it, so the rules are checked just like for any other shift.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Planners: click the plus of a day and a shift type, tick “Offer as open shift” and press “Save”.
  3. Publish the week. Only then do staff see the open shift as a card “Open shift”.
  4. Staff: click the card and press “I want this shift”. You can withdraw the application in the same window.
  5. Planners: click the card, read the applications and press “Assign” next to a name.

Good to know

  • When you assign, the shift becomes a normal shift and the rules are checked. Warnings are shown.
  • Planners are notified of new applications, the chosen person of the assignment.
  • Staff do not see the open shift? It only shows after the week is published. Check the status bar of the area.

Messages and the bell

The bell at the top right of the shift plan collects messages for you, for example a new week or an approved absence.

The bell is your inbox for everything the plan wants to tell you. It saves you from looking at the plan every hour to see whether something changed. For now the messages stay inside Comb. If you want to be sure to see them, glance at the number on the bell when you start your day.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Press the bell. A number shows how many messages are new.
  3. Read the list. New messages are marked.
  4. Press “Mark all as read” to clear the number.

Good to know

  • You are told when a week is published, when a shift of yours is entered, changed or removed, when an absence is decided, and about swap offers and open shifts.
  • At the moment the messages appear inside Comb. Mail and push messages are not sent yet.
  • Messages older than 90 days are removed.

“My week” on the start page

On your start page a card shows your next shift, your hours this month and unread messages.

The card “My week” answers the three questions you ask when you start your day: when do I work next, how many hours do I have this month, did something change? It is the shortest path into the shift plan, and the button “Clock in” saves a click when you arrive at work.

Step by step

  1. Open the start page of Comb.
  2. Find the card “My week”.
  3. Press “To the roster” to open the plan, or “Clock in” to stamp directly.

Good to know

  • The card only appears if the module Shift plan is switched on for you.
  • Only published shifts are shown.

Calendar subscription

With your personal link your published shifts appear in the calendar of your phone and update by themselves.

The calendar link is a subscription, not an export. Your phone fetches the link from time to time and updates your calendar by itself, so a changed shift appears without you doing anything. The link is personal: it contains only your published shifts.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Open the tab “Hours”. Find the box “Calendar subscription”.
  3. Press “Copy link”.
  4. On your phone open the calendar app and add a calendar subscription (“Add calendar by URL”). Paste the link.
  5. Or press “Open in calendar” on a phone that supports it.

Good to know

  • Keep the link private. Anyone with the link can see your shifts.
  • If the link got into the wrong hands, press “Renew link”. The old link stops working at once.
  • Phone calendars refresh at their own pace, often once an hour or less.
  • A change does not show up yet? Phone calendars refresh slowly, sometimes only every few hours. Look in Comb for the current state.

Time clock

Staff clock in and out in Comb. The time clock compares the planned with the stamped time.

The time clock records what really happened, next to what was planned. It does not change the hours account, which counts from the plan, but it shows differences per day, so a lead can see at a glance who came late or stayed longer. For employees it replaces the paper list.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Open the tab “Time clock”.
  3. Press “Clock in” when you start. The running time is shown.
  4. Press “Clock out” when you finish.
  5. Below you see the week: planned hours, stamped hours and the difference per day.

Good to know

  • You can only be clocked in once at a time. Closed months cannot be stamped.
  • If you forgot to stamp, ask your lead to correct it (see “Correct stamps”).
  • The hours account still counts from the plan. The stamps are for comparison.
  • You forgot to clock out? Do not worry, ask your lead to correct the stamp (see “Correct stamps”). Clocking in twice is not possible, so Comb asks you to finish the running stamp first.

Correct stamps

Planners can correct, add and delete stamps of their people. Every change is saved in the history.

Stamps are evidence, so every change is visible. The corrected entry carries a mark, the old value stays in the history, and the person is told about the change. This is what makes corrections fair for both sides.

Step by step

  1. Open the tab “Time clock”. Below the week you find “Team stamps”.
  2. Press “Correct stamp” next to an entry. Change start and end and add a note. Press “Save”.
  3. To add forgotten time, choose the person, press “Add time” and enter start and end.
  4. To delete an entry, open it with “Correct stamp” and press “Remove”.

Good to know

  • Corrected entries are marked “corrected”. The person is notified.
  • Only planners of the person may correct. Entries in closed months cannot be changed.

Payroll export

The payroll export is a CSV file with the hours of every person for a month, ready for your payroll office.

The payroll export turns the month into a file that your payroll office or software can read. It contains one line per person with working hours, vacation, sick days, premium hours and the carry-over. Because it is a plain CSV, it opens in Excel, but also imports into most payroll programs.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Open the tab “Hours”. Choose the month with the arrows.
  3. In the report press “Payroll export (CSV)”.
  4. Open the file in Excel or import it into your payroll software.

Good to know

  • The file contains working hours, vacation days, sick days, night, Sunday and holiday hours and the carry-over.
  • Only people with the permission “Manage” see this button.
  • Close the month first so the numbers are final.

Personnel costs

Planners with the permission “Manage” see the cost of the week next to the plan, based on an hourly wage per person.

Personnel costs give you a feeling for what a week costs while you are still planning, so you can react before the money is spent. The figure is an estimate from the planned shifts and the hourly wages you entered, without employer contributions. Wages are visible only to people who have the right to see them.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Open the tab “Settings”. Find the box with your people.
  3. Enter the hourly wage in euros for each person and save.
  4. Go back to the plan. At the left you see “Personnel costs this week”, and a cost per day above the columns.

Good to know

  • The wage is optional. If it is missing, Comb says for how many people.
  • Wages are visible only to people with the permission “Manage”. Department leads and staff never see them.
  • Only shifts count, not vacation or sick leave.

Working time checks

Comb checks every shift against typical rules of the German working time law and warns you.

Comb knows the typical rules of the German working time law and checks them while you plan, not afterwards. The most important ones are the break (longer days need longer breaks), the maximum hours per week and the number of Sundays a person works. A warning is a hint to look twice, you stay responsible.

Step by step

  1. Save a shift as usual.
  2. Read the warning, if one appears. It names the problem, for example “Break too short”.
  3. Change the shift or leave it if it is deliberate.

Good to know

  • Checked are: the break (30 minutes above 6 hours, 45 minutes above 9 hours), the maximum hours per week, and Sundays per year.
  • You set the weekly limit in “Settings” under “Rules and holidays”.
  • Comb helps you plan but does not replace your own legal check.

Youth protection

For trainees under 18 Comb checks extra rules of the Youth Employment Act.

Under-18s are protected by stricter rules, for example shorter days and a fixed time window. Once you mark a person as “Minor / trainee under 18”, Comb applies those rules automatically to every shift of that person. This is meant as a safety net, because these rules are easy to overlook in a busy week.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Open the tab “Settings”. In the box with your people tick “Minor / trainee under 18” for the person.
  3. Under “Rules and holidays” check the times “Minors from” and “Minors until”. The default is 6:00 to 20:00.
  4. Plan as usual. Comb warns if a rule is broken.

Good to know

  • Checked are: no more than 8 hours a day, 40 hours a week, 5 days a week, 12 hours of rest, and the daily time window.
  • Some trades have exceptions in the law. The warning is a hint, not a ban.

History

Comb records who did what: for every shift, every absence and every week plan.

The history answers the question “who changed this and when?” without any detective work. It is written automatically, cannot be edited and is the same for everybody who may see it. That protects the planner just as much as the employee.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Shift: click the shift card. At the bottom of the window you find “History”.
  3. Absence: click the bar of the absence. The window shows who requested, approved or rejected and when.
  4. Week plan: press “History” next to the area name in the plan. You see who entered, changed, published or withdrew the week.

Good to know

  • Planners see the history of their area, staff only the history of their own shifts and absences.
  • The history cannot be edited or deleted.

Month view

Next to the week you can show the whole month.

The month view is the map, the week view is the street plan. Use the month to see where the gaps and the heavy days are, and the week to fix them. Each chip shows the shift type and a first name, so you recognise patterns without reading details.

Step by step

  1. Open “Shift plan” in the module bar.
  2. At the top press “Month”. Use the arrows to change the month.
  3. Click a day to open its week. Press “Week” to go back.

Good to know

  • The month shows short chips with the shift type and the first name. Up to four are shown per day, then “+ number”.
  • Red numbers are Sundays and public holidays.

Print the plan

Print the week or the month as a clean sheet for the notice board.

Some teams still like a sheet on the wall. Printing produces a clean A4 landscape page without menus. Because drafts are printed with a dashed frame, everybody can see at a glance whether the sheet is final.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Choose the week or the month.
  3. Press “Print”. The print window opens.
  4. Choose your printer, or “Save as PDF” as the target.

Good to know

  • The print shows only the plan on A4 landscape, without menus and buttons.
  • Drafts are printed with a dashed frame. Publish the week first if it is for staff.

Wishes of the team

Planners see the wishes of all their people in one large view, including the notes with the reasons.

This is the planner’s overview of all wishes. Instead of opening every person, you read one table: who wants to work when, who needs which day off, and why. It is best read before you start planning, not afterwards.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Open the tab “Wishes”. Use the arrows to choose the week.
  3. Scroll below your own wishes to “Wishes of the team”.
  4. Read the table: one row per person, one column per day. A green tick is a wish to work, a red cross a wish to be off, with the shift type.
  5. Below the table the notes are listed in full, with the person and the day.

Good to know

  • In the plan, the box “Notes on wishes” at the left shows the notes of the week. In the window to enter a shift, the notes of the chosen person are shown.
  • Only planners see the wishes of others.

Types of employment

Every person has a type of employment: full-time, part-time, trainee, student, mini-job, holiday job, intern or other. It sets the usual hours and some checks.

The type of employment saves typing and prevents mistakes. When you choose “Mini-job”, Comb watches the monthly limit; with “Trainee” it expects school days; with “Part-time” it fills in the usual hours. The small tag next to the name in the plan helps the lead to see who is who, and the filter on the left lets you show only one group.

Step by step

  1. Open “Shift plan” in the module bar.
  2. Open the tab “Settings”. Find the box with your people.
  3. Choose the type of employment for the person. The weekly hours and working days are filled in with usual values.
  4. Change the hours if they differ and press “Save”.
  5. In the plan the type shows as a small tag next to the name (for example “VZ” or “Azubi”). In the left bar you can show or hide types.

Good to know

  • Mini-job: Comb warns when the planned hours of a month are above the limit. You set the limit in “Settings” under “Mini-job”. Usual: earnings limit divided by hourly wage.
  • Trainees: tick “Minor / trainee under 18” for those under 18 to get the youth protection checks. Vocational school days are entered as an absence of the type “Vocational school” and count as worked hours.
  • Comb helps with the planning. Wages, social insurance and limits remain your responsibility.
  • The mini-job limit looks wrong? It is calculated from the earnings limit you set under “Settings”, “Mini-job”, divided by the hourly wage of the person. Without a wage Comb cannot calculate it.

Plan by people

The week plan shows one row per person and one column per day, like a classic roster.

The people view is the classic roster: one row per person, so you read a week from left to right as the story of that person. It is the best view for fairness (who works the weekends?) and for absences, which run through the row as coloured bars. Open shifts live in the last row, so nobody is forgotten.

Step by step

  1. Open “Shift plan” in the module bar.
  2. At the top choose “People”. Every row is one person with the type of employment and the planned hours of the week.
  3. Planners: point at an empty field and press the plus to enter a shift. Drag a shift card to another day or to another person to move it. Hold Alt or Ctrl to copy.
  4. Vacation, sick leave and school appear as colored bars in the row. Wishes of your people appear as “♥” (wants to work) and “✕” (wants to be off).
  5. The last row of an area, “Open shift”, holds shifts nobody has been assigned to yet.

Good to know

  • “Shift types” shows the former view with one band per shift type.
  • “Calendar & filters” opens the side bar with the mini calendar, areas and types of employment. “More room” closes it again.

Click a name: information about a person

In the people view, the name is a button. One click shows everything the roster knows about this person in the current week, so you do not have to hunt through several tabs.

Step by step

  1. Open “Shift plan” and choose “People” at the top.
  2. Click a name on the left of a row. A window opens.
  3. Read department, type of employment, hours per week, hours planned this week, the shifts of the week and the absences.
  4. Planners can press “Add absence” in the same window to enter vacation, sick leave or school for this person.

Good to know

  • The name is one line long in the plan. Long names are shortened, the window shows the full name.
  • The button “Add absence” only appears if you may plan this person.

Questions that are not answered here?

Write to info@avolie.net and we will add the answer to this page.

Help: Files · Help: Management · Help: Account and payment · Help: Shift plan