Avolié Systems Request early access

Help: Files

Last updated: 12 November 2026

This page explains every function of the Files area, step by step, for people who use it for the first time. In Comb, the small round question mark next to a function brings you here.

Comb is in development. The Files area is described as it is built; what you see in your own workspace depends on your permissions and on what your company has switched on.

Getting started

Files is the place where your company keeps its documents. You do not need any training. In four steps you have your first file in.

Files is built like the folders on your own computer, with a few extras that a company needs: every file has a history, can carry tags, can be found by its content and can be shared safely with people outside. You do not have to learn any of this at once. Start with folders and uploading, the rest shows up when you need it.

Step by step

  1. Open “Files” in the top menu. If you do not see it, your company has not switched it on for you.
  2. Press “New folder” and give it a name, for example “Contracts”.
  3. Double-click the folder to open it.
  4. Press “Upload” or drag files from your computer into the window. A small box at the bottom right shows the progress.
  5. Click a file once. The panel on the right shows everything about it. If the panel is hidden, press the key I.

Good to know

  • Everything in the program has a small round question mark. It brings you straight to the matching part of this page.
  • What you can do depends on your permissions. Buttons you are not allowed to use are not shown at all.

Uploading files and folders

You can upload single files, many files at once, or a whole folder with everything inside it.

Uploading runs in the background. You can start many files, move on to other work and look at the progress box now and then. Large files are cut into pieces, so a lost connection does not mean starting from the beginning.

Step by step

  1. Open the folder the files should go to.
  2. Press “Upload”, or drag the files into the window. Dragging also works with whole folders.
  3. For a whole folder, press the small arrow next to “Upload” and choose “Upload folder”. The subfolders are created for you.
  4. Watch the progress in the box at the bottom right. You can keep working while it runs.

Good to know

  • Each file can be up to 2 GB.
  • If the connection breaks or you close the page, large files continue where they stopped. Open Files again and the upload carries on, nothing starts from the beginning.
  • Do not close the page while an upload is running if you can avoid it. The program warns you.
  • An upload is refused? Either the storage space is full (see “Storage space”), the file is larger than 2 GB, or you only have the right to view this folder.

Same file again (duplicates)

Before uploading, Comb checks whether the same content is already stored. If so, you decide what happens.

Duplicates cost storage and cause confusion about which copy is the right one. Comb therefore looks at the content of a file (a kind of fingerprint), not at its name. That is why even a copy named “Contract final FINAL (2).pdf” is recognised.

Step by step

  1. Start an upload as usual.
  2. If a file already exists, a window opens: “These files already exist”. It shows where the existing file is.
  3. For each file choose “Skip” or “Upload anyway”. The buttons “Skip all” and “Upload all anyway” set all at once.
  4. Press “Continue”. Skipped files are not uploaded and use no storage.

Good to know

  • Comb compares the content, not the name. A renamed copy is found too.
  • The check is made for files up to 100 MB. Bigger files are uploaded without it.

Folders, moving and renaming

Folders work like on your computer. Everything can be done with the mouse or the keyboard.

Everything you know from the file explorer works here as well: drag and drop, rename, move, select several. The keyboard shortcuts are meant for people who do this all day. Moving is safe, because nothing is lost: the file keeps its history, its tags and its links.

Step by step

  1. To move a file, drag it onto a folder, onto a folder in the list on the left, or use the right mouse button and “Move”.
  2. To rename, select it and press F2, or use the right mouse button and “Rename”.
  3. To go up one level press Backspace, or use the arrow at the top left.
  4. To select several items, tick the small circles, hold Ctrl or Shift while clicking, or press Ctrl and A for everything.

Good to know

  • Names must be unique inside one folder.

Cards, list and book

Choose how you want to see your files. Your choice is remembered.

The three views are three ways of looking at the same files. Cards help when you recognise things by picture, the list when you want to sort, and the book when you page through documents in sequence. Switching costs nothing and changes nothing.

Step by step

  1. Above the files you find three buttons: Cards, List and Book.
  2. Cards show big preview pictures. List shows name, type, size, date and who added it, and you can sort by clicking a heading.
  3. Book opens the files one after the other like pages. Use the arrow keys to turn the pages.

Quick look with the space bar

Take a quick look at a file without opening anything.

Quick look is for the moments when you are not sure which file it is. You do not open anything, you do not leave the folder, you just peek. It is faster than a download and leaves nothing behind.

Step by step

  1. Click a file once.
  2. Press the space bar. The file opens large.
  3. Use the arrow keys to look at the next or previous file.
  4. Press the space bar or Esc to close it.

Good to know

  • For videos and audio files the space bar starts and stops playback. Close those with Esc.
  • PDFs, pictures, videos and audio files can be shown. Other file types can be downloaded.

One search box finds files by name, by reference number and by the words inside the file.

The search looks in three places at once: the name, the reference number and, for PDFs and text files, the words inside. The result tells you why it was found, so you can judge at a glance whether it is the right file. You never see anything you are not allowed to see, even if the word is in it.

Step by step

  1. Click the search box above the files and start typing.
  2. The results show where each file is stored and why it was found, for example “Name”, “Reference” or a short piece of text with your word marked.
  3. Click a result to see it, or press Enter to open it.

Good to know

  • You only find what you are allowed to see. Folders and files you have no access to never show up.
  • The text inside a file is searched for PDFs and text files (txt, md, csv). Pictures are found by name, tag and reference.
  • A file becomes searchable by its content after someone with edit rights has opened the folder once. This happens by itself in the background.
  • A word inside a new PDF is not found yet? Content is indexed in the background after someone with edit rights has opened the folder. Wait a moment and search again. Pictures are only found by name, tag and reference.

Tags and filters

Tags are coloured labels. They sort files across all folders, because a file can wear several tags no matter where it is stored.

Folders force a file into one place. Tags do not: a file can sit in “Contracts” and still carry the tags “Urgent”, “Customer Müller” and “2026”. Tags are shared by the whole company, so choose names that everybody understands. Filtering by tag shows files from every folder at once.

Step by step

  1. Click a file. In the panel on the right, under “Tags”, press “Add tag”.
  2. Type a new name, pick a colour and press “Create”. Or tick an existing tag.
  3. To tag many files at once, select them first and use the tag button in the bar that appears.
  4. To filter, press “Tags” above the files and choose one or more tags. All files with these tags are shown, from every folder.
  5. Press “Clear filter” to see your folders again.

Good to know

  • To rename, recolour or delete tags press “Manage tags” in the tag window. Deleting a tag only removes the label, never the files.
  • Tags are shared by the whole company.
  • Tagging needs the right to move files.

Example

Before the tax adviser visits, you tag every relevant document with “Tax adviser 2026”: invoices, contracts, bank statements, from six folders. On the day, you filter by that tag, see all 48 files together and send them as a folder link.

Connect a file with a reference number, for example a case number. Later you find the file from there.

A reference number is the thread that ties documents together: a case number, a customer number, an order number. If every document of a case carries the same number, you can find the whole case with one search later, no matter in which folder the files are.

Step by step

  1. Click a file and look for “Linked to” in the panel.
  2. Type the reference number, for example AZ-2026-0815, and press “Link”.
  3. To remove a link press the small cross next to it.

Good to know

  • Upper and lower case do not matter when you search for a reference number.
  • The same links are the basis for customers, contracts and tasks later, so a file can be found from there as well.

Comments

Write a note on a file, for example “please check page 3”. Everyone who may see the file can read it.

Comments keep a conversation next to the file instead of in e-mails. Whoever opens the file later sees why it was changed, what is still open and who has already looked at it. It is the memory of the file.

Step by step

  1. Click a file and scroll to “Comments” in the panel.
  2. Write your note into the box and press “Send”, or press Ctrl and Enter.
  3. To delete a comment press the cross at its top right. You can delete your own comments. People who manage the folder can delete all.

Versions

A new version replaces the file, but the old one is kept and can be called up at any time.

With versions you never need file names like “final_v3_new”. The file stays one file, and its states are kept behind it. Old versions use space, but they save you from the typical mistake of overwriting a good file with a bad one.

Step by step

  1. Click the file and press “Upload new version” in the panel.
  2. Choose the new file. It does not have to have the same name.
  3. Under “Versions” you see all versions with date and author. The current one is marked.
  4. To go back, press “Make current” on an older version. To remove an old version for good, press the bin symbol.

Good to know

  • All versions use storage space.

History

The history shows who did what with a file and when. It cannot be changed afterwards.

The history is the logbook of a file. It answers questions that otherwise cause arguments: who deleted this, who shared it, when was it replaced? Because it cannot be changed afterwards, it is also useful as proof.

Step by step

  1. Click a file and scroll to “History” in the panel.
  2. Read from top to bottom: the latest entry is first. Each entry names the person, the action and the time.

Good to know

  • Uploads, new versions, renaming, moving, deleting and share links are recorded.

Sharing a folder with a link

The same as sharing a file, but for a whole folder with everything in it. This part belongs to the question mark in the folder panel.

A folder link is the right choice when you want to hand over a bundle: all photos of a project, the complete application documents, the data room for a customer. You give one link instead of ten. Files you add later are included, so think about this before you drop something private into the folder.

Step by step

  1. Open the folder and press “Share …” in the panel of the folder.
  2. Choose how long the link is valid, set a download limit or a password if you like.
  3. Press “Create link”, then “Copy link” and send it.

Good to know

  • The person with the link sees the folder content and can download it. New files you add to the folder later are included.
  • For folders you need the right to manage them.

Existing links

The list of all links you have already created for this file or folder.

Use this list as your control panel. It shows every link that is still alive, how often it was used and whether it has expired. A short look here from time to time is good housekeeping, especially for links without an end date.

Step by step

  1. Open the file or folder and scroll to “Existing links” in the panel.
  2. Every link shows its state and the number of downloads.
  3. Press “Withdraw” to stop a link at once.

Good to know

  • You do not see the full link again. If you lost it, create a new one and withdraw the old one.

Sharing with a link

Send a file or a whole folder to somebody who has no account. The link can end by date, by number of downloads, or be protected with a password.

A link is like a key you hand over. The safer you want it, the more locks you add: a short validity, a download limit and a password. For ordinary documents a limit of a few days is enough. For sensitive ones, add the password and tell it by another way than the link, for example by phone.

Step by step

  1. Click the file (or open the folder) and press “Share …” in the panel.
  2. Choose how long the link is valid, for example 7 days.
  3. If you like, tick “Limit downloads” and enter a number. After that many downloads the link stops working.
  4. If you like, enter a password of at least 6 characters.
  5. Press “Create link”, then “Copy link” and send it, for example by email.
  6. Tell the password another way, for example by phone, not together with the link.

Good to know

  • You see the full link only once, right after creating it. Comb stores only a fingerprint of it. If you lose it, create a new one.
  • Under “Existing links” you see every link with its state and the number of downloads. “Withdraw” stops a link at once.
  • After 8 wrong passwords the link is blocked for 15 minutes.
  • A link without an end date stays valid until you withdraw it. Use this carefully.
  • To share you need the right to move files, and for folders the right to manage them.
  • The person with the link opens a simple page, enters the password if there is one and downloads. No account is needed.
  • You lost the link? Comb never shows it again. Create a new link and withdraw the old one in the list “Existing links”.

Example

You send an offer to a prospect. Valid for 7 days, limit of 3 downloads, no password. The prospect downloads it once and forwards it to her boss, who downloads it as well. After the third download the link stops, and you see in the list that it was used twice. For a contract with salary data you would add a password.

Storage space

Your plan includes a fixed amount of storage. The bar at the bottom left shows how much is used.

Storage is shared by the whole company. It fills up faster than most people think, because versions and the trash count as well. A look at the bar once a month prevents the surprise of a refused upload.

Step by step

  1. Look at “Storage” below the folder list. It shows the used part and the total.
  2. From 80 percent a note appears. When the space is full, new uploads are refused with a clear message.
  3. To get more space, ask the person who manages your Comb account.

Good to know

  • Files in the trash and old versions still use space until they are removed for good.
  • Your existing files stay available even when the space is full. Only new uploads are paused.

Trash

Deleted files are not gone at once. They wait in the trash for 30 days.

The trash is your safety net. Nothing is lost by a wrong click, and for 30 days you can change your mind. The countdown on each item tells you how long it will last. After that, the file and all its versions are really gone.

Step by step

  1. Select a file and press the Delete key, or use the right mouse button and “Delete”.
  2. To see the trash, press the bin symbol above the files. Each item shows how many days are left.
  3. To get a file back, select it and press “Restore”. It returns to its old folder.
  4. To remove it for good before the time is up, press “Delete forever”.

Good to know

  • After 30 days files are removed for good, together with all their versions. This cannot be undone.

Who may do what

Your company decides who may see, upload, move or manage which folder. The management sets this per department, role or person. Your own rights show in the buttons you have.

Rights in Files are not a mystery: what you see on your screen is what you may do. A missing button is the answer, not an error. The management sets the rights per department, role or person and per folder, so two colleagues can see different things in the same system.

Step by step

  1. No “Upload” button: you may look at the folder, but not add anything.
  2. No “Tag” or “Share” button: you lack the right to move files.
  3. Folder missing completely: you have no access to it.

Good to know

  • For management: open “Management”, then “Permissions”, choose “Files”, then a department, role or person and a level per folder. All levels are explained in Help: Management.
  • A folder without its own setting takes the setting of the folder above it. The setting applies to everyone in that department.
  • The small question marks (“?”) can be switched off for staff under “Management”, “Settings”. Management always sees them.
  • Ask the person who manages your Comb account if you need more rights.

Questions that are not answered here?

Write to info@avolie.net and we will add the answer to this page.

Back to the Files module · Help: Management